ChipLock
Stückliste
| Anzahl | Bauteil | RM/Gehäuse |
|---|---|---|
| 1 | Microcontroller PIC16F84-04I/P (programmiert) | DIP18 |
| 1 | Eeprom 24C16 | DIP8 |
| 1 | Quarz 4MHz | HC49/U-S |
| 1 | Transistor BC547B | TO92 |
| 4 | Diode 1N4001 | RM10 |
| 1 | Diode 1N4148 | RM10 |
| 1 | Spannungsregler MC7805 | TO220 |
| 1 | Leuchtdiode; 3mm; rot | RM2,5 |
| 1 | Leuchtdiode; 3mm; grün | RM2,5 |
| 2 | Keramik-Kondensator 27pF | RM5 |
| 1 | Keramik-Kondensator 10nF | RM5 |
| 2 | Keramik-Kondensator 100nF | RM5 |
| 1 | Elektrolyt-Kondensator 100µF; 25V | RM5 |
| 1 | Widerstand 0.25W/5%; 22k | RM10 |
| 5 | Widerstand 0.25W/5%; 10k | RM10 |
| 1 | Widerstand 0.25W/5%; 4,7k | RM10 |
| 2 | Widerstand 0.25W/5%; 1k | RM10 |
| 2 | Widerstand 0.25W/5%; 470R | RM10 |
| 1 | Widerstand 0.25W/5%; 100R | RM10 |
| 1 | Transformator 230/12V; 125mA; 1,5VA; GERTH "BV3112-1" | N/A |
| 1 | DIL-Relais; 5V; Zettler "AZ820-2C-5DE" | DIP |
| 1 | ISO-7816 Kartensteckverbinder; ITT-Cannon "CCM02" | N/A |
| 1 | 2-polige Printklemme | RM5 |
| 1 | 3-polige Printklemme | RM5 |
| 1 | 9-poliger D-Sub Print-Steckverbinder, 90° | N/A |
| 1 | 1-poliger Schalter oder Taster | RM7,5 |
| 1 | ChipLock-Platine | N/A |
Im ChipLock V1.0 - Interface und den Low-Voltage-Versionen entfallen einige Bauteile !
ChipLock - ©05-07/1999 Marco Schmoll * www.controller-designs.de * Alle Rechte vorbehalten !